TELEPHONE CABLES

KPD-AP / PD-AP

KPD-PAP / PD-PAP

VBV / VBV-K

VBAPV / VBAPV-K

HBH / HBH-K

HBAPH / HBAPH-K

PDV / PDV-K

PDAPV / PDAPV-K

J-Y(St)Y…Lg

J-Y(St)Y…Lg

JE-H(St)H…Bd

JE-Y(St)Y…Bd

J-Y(St)Y…Bd

J-H(St)H…Bd

J-YY…Bd

J-HH…Bd

JUMPER WIRE

J-2Y(St)Y

J-2Y(St)H

J-2Y(St)CY

J-2Y(St)CH

A-2Y(L)2Y St III Bd

A-2YF(L)2Y St III Bd

J-2Y(St)H

2Mbit PCM Cable

Construction

Inner Conductor: Elc.annealed solid copper 0.4/.0.5 mm (EN 60228, class 1) Insulation: Solid PE (EN 50290-2-23) Core colors acc. to table 1 Lay-Up: Pair twisted cores, up to 20 pair twisted in layers and fixed with PES tape. Screen: AL-PES tape with together (0,40 and/or 0,50 mmØ) mono tinned copper drain wire with screened.   Outer Sheath: HFFR (EN 50290-2-27) Sheath Color: RAL 7032 Gray  or RAL 7001, Gray

General Features

Flame Test: IEC 60332-1, EN 60332-1, VDE 0482-332-1 Halogen-Corrosive Gas Test: IEC 60754-2, EN 50267-2, VDE 0482-267-2 Smoke Density: IEC 61034-2, EN 61034-2, VDE 0482-1034-2

Application

PCM cables are used as distribution cable between PCM devices in digital transmission systems for signal transmission between 300 – 3600 VF (voice frequency) and digital signal transport at 2,048 Mbps

Product Data-Sheet

Click for product PDF file